How To Apply The Self-Adhesive Plate - MarelliMotori MXB-E 225 Serie Manual Del Usuario

14. HOW TO APPLY THE SELF-ADHESIVE PLATE

An envelope containing the data plate can be found inside the terminal box.
This plate must be applied on the alternator as follows:
1. The self-adhesive plate must be applied at a room temperature, above 15°C.
2. Clean the relevant area with alcohol and wait until it is completely dry.
3. Remove the adhesive from the plate and apply it as shown in fig. 18 by pressing on it with a rubber
roller to ensure greater adherence.
All translation, reproduction and modification
rights, whether in part or in full and by any means
(including photostatic copies and microfilms), are
reserved.
Marelli Motori reserves the right to make any
changes.
963857253_=
Fig. 18
50