Virtual Barrier; Pause; Stopping The Robot - Amibot Flex Laser Manual De Instrucciones

EN
Operation
HOME mode
If you need to charge the robot at any time while in use, you can do
so by pressing the "Charge" button.
The AUTO indicator light is steady blue and the robot emits
a "Return to charging station" audio message.
automatically go back to home base once it has completed its
cleaning cycle (the time it needs to search depends on the distance
between the home base and if there are any obstacles along its
route).

Virtual barrier

You can identify forbidden areas manually. Use the virtual magnetic
barrier provided. Place it at the edge of the two areas you want to
separate. The robot stays within the virtual barrier while it is clean-
ing (no matter which cleaning mode is selected).

Pause

To pause the robot, press the AUTO button on the robot or click
"Pause" then "Pause cleaning".
NOTE: After a few minutes, the robot automatically returns to its home base. If
the charging dock is not plugged in, the robot switches to stand-by after a several
minutes. It can be switched back on at any time by pressing the AUTO or from the
mobile app. Press the desired cleaning mode button a second time to reactivate its
cycle.

Stopping the robot

When the robot finishes its cleaning cycle, it goes back to its home
base. To stop it manually, press the AUTO button on the robot or
20
The robot will