Safety Instructions And Precautions; Operating Conditions - Amibot Flex Laser Manual De Instrucciones

EN

Safety instructions and precautions

Operating conditions

When using
should always
• This appliance is not intended to be used by children or any person
with reduced physical, sensory or mental capacities, unless they
have been given supervision or instruction concerning use of the
device from a person responsible for their safety.
• Do not allow children to play with the appliance.
• Children should not clean or perform maintenance on the
appliance without supervision.
• The appliance must be kept out of children's reach while switched
on.
• The appliance must not be used if it has suffered a fall or presents
visible signs of damage.
• Do not use the appliance in extremely hot or cold environments
(below 0˚C, above 40˚C).
• To reduce the risk of electrical shock, do not place the appliance
near water or other liquids apart from when using the robot's
water tank.
• Do not touch the power plug or the appliance with wet hands.
• For household use only.
• Only use accessories recommended or supplied by the
manufacturer.
• Please make sure your power supply voltage matches the power
voltage marked on the power adapter.
• Store the appliance away from heat and flammable materials.
• Do not pull on the appliance's power cable to avoid causing
possible damage.
• Make sure you do not insert objects in the laser module.
• Keep the power cable away from sources of heat.
• Do not use the appliance if the power cable or plug are damaged.
• IMPORTANT: Only use the home base and the power cable
an electrical
be
appliance, basic
followed, which
36
precautions
include: