Central Brush And Dust Inlet; Microfibre Cleaning Pads - Amibot Flex Laser Manual De Instrucciones

EN
Maintenance

Central brush and dust inlet

Central brush and its holder
Unclip the central brush's holder underneath
the robot and remove the brush. Clean the
cavity using a soft cloth and remove dust and
other debris caught around the brush. Run
under clean water for optimum cleaning.
Wait until it is fully dry before putting it back.
Dust inlet
Unclip the
the robot.
the dust inlet

Microfibre cleaning pads

The microfibre
at 30° maximum
clean water
NOTE: Accessories need to be replaced in accordance with how frequently the
robot is used and the amount and type of debris that it picks up.
dust inlet
Clean the cavity
using a
cleaning
or
and your
underneath
and
soft cloth.
pads are machine
may be hand-washed
usual washing
26
washable
with
detergent.