Sony Trinitron PVM-14L2MD Manual De Instrucciones página 19

WARNING
Important safeguards/notices for use in the
medical environments
1 All the equipments connected to this unit shall be
certified according to Standard IEC601-1, IEC950,
IEC65 or other IEC/ISO Standards applicable to the
equipments.
2 When this unit is used together with other equipment
in the patient area*, the equipment shall be either
powered by an isolation transformer or connected via
an additional protective earth terminal to system
ground unless it is certified according to Standard
IEC601-1 and IEC601-1-1.
* Patient Area
3 The leakage current could increase when connected
to other equipment.
4 The operator should take precautions to avoid
touching the rear panel input and output circuitry and
the patient at the same time.
5 Model PVM-14L2MD/PVM-20L2MD is a video
monitor intended for use in a medical environment to
display video pictures from cameras or other video
system. These models are nonpatient care equipment
with respect to the requirement of leakage current.
Warning on power connection
Use a proper power cord for your local power supply.
Plug type
Female end
Cord type
Minimum cord set rating
Cord length
Safety approval
United State
HOSPITAL GRADE HOSPITAL GRADE
E41395 LL33182
E41395-A LL76662
10A/125V 10A/125V
1
Max. 4.5 m (177 / in.) Max. 4.5 m (177
4
UL CSA
Symbols on the unit
Symbol Location
Front panel
Rear panel
Rear panel
Rear panel
Rear panel
Canada Continental Europe
LP-34A
LS-60
H05VV-F
10A/250V
1
/ in.) –
4
VDE
This symbol indicates
Main power switch. Press to turn
the monitor on or off.
The equipotential terminal
which brings the various parts of
a system to the same potential.
Functional earth terminal
Alternating current
Attention, consult
ACCOMPANYING
DOCUMENTS
Japan
VM1050
VM1010
PVCTF
12A/125V
–
DENAN-HO
19