Publicidad
Idiomas disponibles
Idiomas disponibles
© Copyright HT ITALIA 2010
USER MANUAL
•
This note must be read in full. Any operations on live conductors can be dangerous.
•
The operator is expected to be fully aware of all necessary electrical safety regulations
and procedures. Safe operation is this responsibility.
•
It is up to the user to ensure that the equipment is at all times in its original safe
conditions.
•
Operate on ranges selector on the bottom part of clamp, free of instrument connection
cable, (see Figure) to modify current ranges.
SPECIFICATIONS
Primary rates AC current: 200A, 2000A FS
Measuring range:
Output signal:
Protection:
Ratio:
Accuracy:
External min load:
Power measurement:
Frequency range:
Pollution degree:
Dielectric strength:
Temperature range:
Overvoltage category:
Max diameter cable:
"Opening" bus bars:
Dimensions (mm):
Weight:
Output connection:
ACCURACIES
200A FS
Precision in % of the output signal
Phase difference
2000A FS
Precision in % of the output signal
Phase difference
Measurements performed with digital instrument, model 1.200.000 digits class 0.2 Cofrac
CAUTION: this symbol indicates that equipment and its accessories shall be subject to a
separate collection and correct disposal.
ENGLISH
0,1 ÷ 200A / 1A ÷ 2000A
1V AC
By diodes
5mV/A – 0.5mV/A
See table
10kΩ
Keep the conventional direction P1
40Hz ÷ 5kHz
2 according to IEC 1010-1
5.5kV/50Hz 1min
-10 ÷ +50 °C
CAT III 600V
70mm
100x46mm o 126x35mm
133 x 336 x 52 mm
1.7 kg
Cable 2m with Hypertac connector
1A
±(1%rdg+1mV)
1°
10A
±(1%rdg+0.5mV)
1°
traceable
CAUTION
Ranges selector 200-2000A
P2 rear of the arrows
40A
±1%rdg
40'
400A
±1%rdg
40'
HP30C2
Release 1.03 - 21/09/2010
200A
±0.5%rdg
30'
2000A
±0,5%rdg
20'
2
Publicidad
