11.
Attach the front section A to the electronics cover and
secure it on the tube with safety clip B.
12.
Attach the rear part of the electronics cover C from
above.
Removal
The electronics cover is removed in reverse order.
1556395-D
Fig. 4-15
Fig. 4-16
4.11 Removing Battery Pack
1. Remove electronics cover, refer to 4.10 Fitting Electronics
Cover, page 18.
Risk of Damage
– Make sure that the connector between
electronics cover and battery pack is
disconnected.
2. Remove footrests, refer to 4.9 Fitting Footrests, page 17.
3.
A
Fold safety bar B forward and remove connector C
from battery pack A.
C
B
Fig. 4-17
Setup
19