Signal Strength Indicator; Reset; Default Settings; Menu Of The Parent Unit - Philips AVENT SCD565 Manual Del Usuario

6.4 Signal strength indicator

6.4.1 In Smart Eco mode
Smart Eco mode is the standard operating mode.
In this mode, the strength of the DECT signal
depends on the distance between the baby unit
and the parent unit.
• If the signal strength indicator has 4 bars,
the connection between the baby unit and
the parent unit is excellent.
•
If the signal strength indicator has 1 bar or
no bar at all, the transmission signal from the
baby unit is very weak or not available.
Take the parent unit closer to the baby unit to
get a better signal.
6.4.2 In Eco Max mode
In this mode, the DECT signal from the baby unit
to the parent unit is switched off.
• The signal strength indicator has no bar at all
when the baby unit has switched off its DECT
signal, even when the parent unit is within
range of the baby unit.
•
When the baby unit starts to transmit a DECT
signal because the baby is making a sound,
the display goes on and the signal strength
indicator shows the quality of the connection
between baby unit and parent unit.
•
For more information on the Eco Max mode,
see 'Eco Max mode' in chapter 'Menu of the
parent unit'.

6.5 Reset

This function allows you to reset the parent unit
and the baby unit to the factory default settings.
Switch off the unit.
1
Press and hold the - button.
2
Switch on the unit again while holding the -
3
button.

6.5.1 Default settings

Parent unit
• Language: English
•
Loudspeaker volume: 3
•
Microphone sensitivity: 3
•
Temperature alert: off
•
'Temperature low' alert: 14°C (57°F)
• 'Temperature high' alert: 35°C (95°F)
• Temperature scale: Celsius
•
Eco Max mode: off
•
Feed timer: 02:00
•
Feed timer: Stop
•
Clock: hidden Baby unit
• Loudspeaker volume: 4
• Nightlight: off
•
Lullaby: off (lullaby 1 selected)
7 Menu of the parent
unit
All functions described in the following sections can
be operated through the menu of the parent unit.

7.1 Navigating the menu

Note:
D
Some menu functions only work when the baby
unit and the parent unit are linked.
Press the MENU button to open the menu.
1
• The first menu option appears on the display.
Use the + button to go to the next option or
2
the - button to go to the previous option.
13