User Responsibility; Scope Of Supply; Purpose; Preparing Headlights And Head Mirrors For Use - Riester ri-focus LED Instrucciones Para El Uso

1.6 User responsibility

Caution!
User responsibility
It is your responsibility to:
The user must check the integrity and completeness of the examination lamps before each use. All components must be compatible with each other.
Incompatible components can result in degraded performance.
Never knowingly use a defective device.
Replace parts that are defective, worn, missing or incomplete.
Contact the nearest factory-approved service centre if repairs or replacements are required.
In addition, the user of the device bears sole responsibility for malfunctions resulting from improper use, incorrect maintenance, improper repair, damage or chan-
ges by persons other than Riester employees or authorized service personnel.
All serious incidents related to the product must be reported to the manufacturer and the competent authority of the Member State in which the user and/or the
patient is established.
If there are any problems with the product or use of the product, please contact your supervisor immediately.

1.7 Scope of supply

6090 Ri-focus LED with a set of CR 123A lithium batteries
6091 Ri-focus LED with a set of NiMH AAA rechargeable batteries and 230 V plug-in charger
6092 Ri-focus LED with a set of NiMH AAA rechargeable batteries and 120 V plug-in charger
6070 Clar N with a set of CR 123A lithium batteries, 6 V vacuum
6072 Clar N with a set of CR 123A lithium batteries, LE
6071 Clar N with a set of NiMH AAA batteries and 230 V plug-in charger, 6 V vacuum
6074 Clar N with a set of NiMH AAA batteries and 120 V plug-in charger, 6 V vacuum
6073 Clar N with a set of NiMH AAA rechargeable batteries and 230 V plug-in charger, LED
6075 Clar N with a set of NiMH AAA rechargeable batteries and 120 V plug-in charger, LED
2. Initial Setup of the device
Headlights and head mirrors

2.1 Purpose

The headlamps and head mirrors described in these instructions for use (IFU) are manufactured for illumination of body parts under examination¬.

2.2 Preparing headlights and head mirrors for use

Caution!
Do not use the examination light for eye exams.
There may be a risk of ignition if the device is operated in the presence of flammable mixtures of pharmaceuticals and air, oxygen, nitrous oxide or anaesthetic
gases!

2.3 Use and function

2.3.1 Adjusting the headband

The adjustment of the headband is the same for all models.
Turn the aluminium rotary knob counterclockwise to loosen it. Adjust the headband and secure it in the desired position by turning the rotary knob clockwise to
tighten.
20