Data Hold Button; Back Light Button - koban KMD-15 Instrucciones Operativas

OPERATING INSTRUCTIONS

DATA HOLD BUTTON

The Data Hold function allows the meter to "freeze" a
measurement for later reference.
1. Press the DATA HOLD button to "freeze" the reading on
the indicator. The indicator "HOLD" will be appear in the
display.
2. Press the DATA HOLD button to return to normal
operation.

BACK LIGHT BUTTON

1. The BACK LIGHT button is used to turn the back light
on or off. Press the BACK LIGHT BUTTON to turn the
back light on.
2. Press the BACK LIGHT BUTTON to turn the back light
off.
WARNING: Risk of electrocution. High-voltage
circuits, both AC and DC, are very dangerous and
should be measured with great care.
1. ALWAYS turn the function switch to the OFF position when
the meter is not in use.
2.If "OL" appears in the display during a measurement, the
value exceeds the range you have selected. Change to a
higher range.
NOTE: On some low AC and DC voltage ranges, with the
www.grupotemper.com
KMD-15
DIGITAL MULTIMETER
11