Getting Started; Registration; Latch And Lock Operation - SentrySafe HD4100L Manuel Del Dueño

Getting started

Thank you for purchasing this SentrySafe product.
To enjoy the greatest protection and satisfaction from this product, please read the
information in this packet and keep it for future reference.
Please take a moment to write down the information we will need to help you
if a question arises.
UL Number_______________________________________________
(Located on inside of lid)
Model Number _____________________________________________
(Located on bottom of front label package)
Date of Purchase_____________________________________________
Contents Include:
- 1 Fire-Safe™
- 2 Keys
- 1 OneTouch Light
- 2 EZ Straps
- Two Cell Batteries (CR2032 Lithium 3V)
- Owner's Manual
- Warranty Card
- Registration Card
Note: Replacement batteries for the OneTouch Light can be found at most
major retailers and convenience store locations.

Registration:

To be eligible for warranty coverage the original purchaser must
register the product online at www.sentrysafe.com or complete the
enclosed registration card.
2

Latch and Lock Operation:

1
To unlock and open:
Insert key in lock and turn clockwise
1
Pull up from bottom of latch while pushing down on lid to release.
2
To close and lock:
Close and while pushing down on the lid, press down on the latch until it
1
is secure.
Insert key in lock and turn counterclockwise.
2
Warning
Keys could potentially be locked inside unit. To avoid this, do not open
and place keys inside unit before relocking.
To open after unit has been submerged in water:
Remove the unit from water.
1
Dry the exterior of the safe with a paper towel, taking care to remove
2
water droplets from around the opening.
Remove any excess water from between the lid and the base.
3
Open the lid slowly; there may be a few droplets of water on the gasket.
4
If so, dry with towel.
3