Descargar Imprimir esta página

Swing-N-Slide PB 9210 Instrucciones De Ensamblaje página 27

Publicidad

Slide Installation.
1. Position slide to determine proper location for stake.
2. Drive wood stake into ground leaving 2'' exposed.
3. Secure the slide bottom to the stake using (2) 1-1/4'' deck screws. (Fig. 18a).
4. Attach slide to unit as shown in (Fig. 18).
Fig. 18
(2)
1-1/4'' screws
per joint
5/4'' x 4'' x 17''
1-1/4'' screw
Fig. 18a
1'' Truss Screw
Use truss head screws
to secure slide to deck.
27
PB 9210 ssembly Instructions
(3)

Publicidad

loading