Publicidad
Idiomas disponibles
Idiomas disponibles
The fixation needs to be done as it is shown in the picture below.
SCREEN UNIT (D1)
Mount the bracket of the screen unit (SC1) on the dashboard or any other place where it is clearly visible, but do not
impair control or operation of the vehicle. Take into consideration that the infrared receiver for the remote control is built-
in in the screen unit, so for a reliable operation make sure that the screen and the remote control are in visible area at
40-50 cm distance and in an angle of about 30 degrees.
Search for a location in your car where the screen unit fits and where it is comfortable for use. Make sure that the location
in your car where you would like to install your screen unit is free from dust and dirt.
The bracket for the screen unit can be fixed in 2 ways:
1.
Immediately to the dashboard using the installation screws.
2.
To the fixing plate using the installation screws. The fixing plate should then be fixed to the dashboard or to any
other place in the car by means of the double sided tape plate.
3.
If you want to fix the screen unit on a vertical surface of the dashboard, you can use the angle bracket.
MICROPHONE (M1)
Mount the microphone close to the user's head (30 cm is optimal) and position it so that it is directed towards the mouth.
Experience has shown that the best location is near the rearview mirror or to the left of the sun visor. To avoid echo we
recommend having a minimum distance of 1 meter between the microphone and the handsfree unit.
...........................................................................................................................................................................
GB - 8
Publicidad
Capítulos
