Mr Handsfree Blue Perfection Manual Del Usuario página 11

Make sure to mount the microphone so that it is not exposed to air streams from the vents. Do not lay the microphone
cable in the heating, ventilation or AC systems. Fix the microphone using Velcro.
SYSTEM CABLE (SC1)
The system cable SC1 comes out of the bracket of the screen unit and is used for connecting the screen unit to the
handsfree unit via a socket.
Ensure that the cable is placed so that it will not be damaged (e.g. not laid under car seats or over sharp edges).
CONNECTING TO THE POWER
There are 2 ways of connecting the Blue Perfection to the car's electronic system:
1. Plug & play connection: via the adapter for the cigarette lighter (SC3).
2. Built-in connection: immediately to the car's electronic system via system cable SC2.
The wires of the cable SC2 are color coded. They are listed in Table 1 in column A and each wire should be connected to the
corresponding item listed in column B.
Table 1.
A
Red wire
Black wire
Blue wire
Brown wire
• To avoid distortions make sure that the cables are laid far away from the electronic systems of the car.
• Connect the wires with the contact clips. Put the car wire in the through groove of the clips and the cable wire in the
groove with the confining rib.
Attention!
If there is no "Ignition" wire or if it is unavailable, you should connect the blue cable wire to the red wire of the handsfree
unit and the red cable wire to the "Discontinuous" wire of the car which keeps the voltage when the ignition is turned off.
CAR RADIO MUTING (CRM)
The Blue Perfection allows muting your Car Radio when there is an incoming call.
• Check the user's manual of your Car Radio to make sure that it has a Mute function. If additional settings have to
be set from the Car Radio menu, make sure that they are done correctly.
• Remove the control panel of the Car Radio.
• Remove the decorative panel and take out the Car Radio from the sleeve using the handles. Disconnect the Car
Radio plug.
...............................................................................................................................................................................
B
The + voltage of the car's power supply
The negative GND connection
Ignition
Used for Car Radio muting (CRM) and has to be connected to the Car Radio (Mute)
GB - 9