mabe ASCHAM09EYT Instructivo página 58

connecting pipes to the indoor unit
1. Remove the indoor unit pipe caps (check that there is no debris
inside).
2. Insert the flare nut and create a flange at the end of the connec-
tion pipe.
3. Tighten the connections using two wrenches and working in op-
posite directions.
indoor unit condensed water drainage
The correct installation of the indoor unit condensed water drain-
age is a fundamental step for a successful installation of the system.
1. Place the drain hose below the piping, taking care not to create
siphons.
2. The drain hose must slant downwards to aid in the water drain-
age.
3. Do not bend or twist the drain hose or leave the end submerged
in water.
4. If pipes are installed to the right side, they must be secured to the
rear of the unit using a support.
5. Insert the pipe connection into the proper port.
6. Press to join the pipe to the base.
Wrench
Yes
57