mabe ASCHAM09EYT Instructivo página 66

For 9k, 12k, 18k and 22k models
equipped with inverter
Indoor Unit
BL Blue
BR Brown
GN Green
RD Red
Power
WH White
Supply
Outdoor Unit
YE Yellow
Please review the wiring diagram attached the unit first.
Note: On models without terminal block, wires have been connected
to the main PCB of the indoor unit by manufacturer. See the wiring
diagram located on the right side of the unit, under the front panel,
and at the back of the outdoor unit cover.
specifications of wires
Model
(by capacity
in BTU/h) 5 k
Power supply 1,0 mm²
N
AWG18
Wire
1,0 mm²
L
AWG18
1,0 mm²
G
AWG18
N 1,0 mm² 1,0 mm² 1,0 mm²
Connection
Wire
L 1,0 mm² 1,0 mm² 1,0 mm²
1 1,0 mm² 1,0 mm² 1,0 mm²
2
0,75 mm²
3 0,75 mm²
0,75 mm²
The fuse used for the PCB board of 220 V 7K, 9K, 12K, 18K, 22K, 24K
and 30K indoor units is 50T - 3,15 A - 250 V.
The fuse used for the PCB board of 110 V 7K, 9K and 12K indoor
units is 50T - 3,15 A - 125 V.
The fuse used for the PCB board of 220 V 7K, 9K and 12K outdoor
units is 61T - 15 A - 250 V; for 18K, 22K, and 24K is 65TS - 25 A - 250
V
For 24k, 28k and 30k Cool/Heat models
equipped with inverter
BL Blue
BR Brown
GN Green
RD Red
WH White
YE Yellow
Section of wire (area)
7 k 9 k 12 k
1,0 mm²
1,0 mm² 1,0 mm²
(1,5 mm²)
AWG18 AWG18 AWG18
(AWG16)
1,0 mm²
1,0 mm² 1,0 mm²
(1,5 mm²)
AWG18 AWG18
AWG18
(AWG16)
1,0 mm²
1,0 mm² 1,0 mm² (1,5 mm²)
AWG18
AWG18 AWG18
(AWG16)
1,0 mm²
(1,5 mm²)
1,0 mm²
(1,5 mm²)
1,0 mm²
(1,5 mm²)
0,75 mm² 0,75 mm² 0,75 mm² 0,75 mm²
0,75 mm² 0,75 mm² 0,75 mm² 0,75 mm²
0,75 mm² 0,75 mm² 0,75 mm² 0,75 mm²
Indoor Unit
Outdoor Unit
Power Supply
15/18 k 22/24 k 28/30 k
1,5 mm² 2,5 mm² 4,0 mm²
AWG16 AWG14 AWG12
1,5 mm² 2,5 mm² 4,0 mm²
AWG16 AWG14 AWG12
1,5 mm² 2,5 mm² 4,0 mm²
AWG16 AWG14 AWG12
1,5 mm² 0,75 mm² 0,75 mm²
1,5 mm² 0,75 mm² 0,75 mm²
1,5 mm² 0,75 mm² 0,75 mm²
0,75 mm² 0,75 mm²
0,75 mm² 0,75 mm²
0,75 mm² 0,75 mm²
65