User Maintenance - Andis SLII Instrucciones De Uso Y Cuidado

6. Never drop or insert any object into any opening.
7. Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.
8. Do not use this appliance with a damaged or broken
blade or comb, as injury to the skin may occur.
9. If this trimmer has means for grounding, connect to a
properly grounded outlet only (see grounding instructions).
10. To disconnect turn control to OFF then remove plug from
outlet.
SAVE THESE INSTRUCTIONS
THIS PRODUCT INTENDED FOR PROFESSIONAL USE
These instructions only apply to trimmers with a 2-prong plug:
To reduce the risk of electric shock, this appliance has a polarized plug (one
blade is wider than the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to install the proper outlet. Do not
change the plug in any way.
OPERATING INSTRUCTIONS
Before starting trimmer remove blade guard (some models may not have a
blade guard). Plug cord into electrical outlet, operate at 120 volt, 60 cycle
AC electrical current or as noted on the unit. To start trimmer move switch
button to ON position, to stop, move switch button back to original
position. After using your Andis trimmer, rewrap cord and store in a safe
place.

USER MAINTENANCE

The internal mechanism of your trimmer has been permanently lubricated
at the factory. Other than the recommended maintenance described in
this manual, no other maintenance should be performed, except by Andis
Company or an Andis authorized service station. To find an Andis
authorized service station near you log on to www.andis.com or contact
our customer service department at 1-800-558-9441.
3