Remote Operation; Operating The Remote Control - Home Decorators Collection 91662 Guía De Uso Y Cuidado

Operation
CAUTION: This device complies with part 15 of the FCC rules.
Changes or modifications not expressly approved by the
manufacturer could void your authority to operate this equipment.
Remote Control - Your fan is equipped with a remote control to
operate the speed and lights of your new ceiling fan.
The appropriate speed settings for warm or cool weather depends
on factors such as the room size, ceiling height, and number of fans.
NOTE: The reverse switch is located at the top of motor housing.
Shut the fan off then wait until the blades have completely
stopped before flipping the switch to reverse the direction of
your ceiling fan.
Warm weather - (Forward) A downward airflow creates a cooling
effect. This allows you to set your air conditioner on a warmer
setting without affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off
of the ceiling. This allows you to set your heating unit on a cooler
setting without affecting your comfort.

Remote Operation

1

Operating the remote control

- Press and release the
□
Press and hold the button for 3 seconds to use the "walk away time delay"; this will activate the
light for 30 seconds (if you are using dimmable bulbs the light will be activated at 50% brightness).
- Press and release 1 time - turns the fan on high speed.
- Press and release 2 times - turns the fan on medium speed.
- Press and release 3 times - turns the fan on low speed.
- Press and release 4 times - turns the fan off.
- Press and release the
randomly, simulating a relaxing breeze. To cancel this feature press
- While the fan is on press 1 time - turns on a 2 hour run timer.
- While the fan is on press 2 times - turns on a 4 hour run timer.
- While the fan is on press 3 times - turns on an 8 hour run timer.
- This setting allows the fan to automatically turn on and off at a previously set room temperature.
- Press 1 time to adjust the set temperature + 1°, press and hold to raise the set temperature
multiple degrees.
- Press 1 time to adjust the set temperature - 1°, press and hold to lower the set temperature
multiple degrees.
- Digital display shows the set temperature when
- Press and release the
If you are using dimmable bulbs and you have previously set O/D dip switch in your remote to the "D"
position, press and hold the
button to turn the fan and the lights on or off.
button to enable Comfort Breeze
button to turn the light on or off.
button to activate the dimmer function.
; this will change your fan speed
TM
or .
or is pressed.
14