Product Description; Model Number - Franklin Electric FPS 3NC NON-CLOG Serie Manual Del Propietário

PRODUCT DESCRIPTION

The NC Series pumps are intended for domestic sewage, wastewater, or stormwater from commercial buildings,
condominiums, hotels, hospitals, industrial, treatment, and general dewatering applications. They are not
intended for use in potable applications or in hazardous locations. Various configurations and methods for
plumbing this series of pumps may be used; however, for ease of installation, proper operation, and serviceabil-
ity, it is highly recommended to use a Franklin Engineered Products basin package with rail system and Franklin
Engineered Products control panel.
Three inch discharge flange pumps are capable of handling 2.5" spherical solids, and four inch discharge flange
pumps can handle 3" spherical solids.
Please examine your item(s) carefully to ensure that no damage occurred during shipment. If damage has
occurred, please contact the place of purchase and they will assist you in replacement or repair, if required.
This product is covered by a Limited Warranty for a period of 24 months from the date of original purchase by
the consumer. For complete warranty information, refer to www.franklinengineered.com; or, call Customer Sup-
port for a printed copy.
Pump Information
Pump Model Number
Pump Item Number
Pump Serial Number
Purchase Date
Installation Date
Current and Voltage Readings at Start-Up
1 Phase
Amps
Volts

Model Number

Control Panel Model Number
Control Panel Item Number
Control Panel Serial Number
Installer/Contractor Name
Installer/Contractor Phone
3 Phase
L1-L2 L2-L3
PRODUCT DESCRIPTION
Model Number
L3-L1
3