Yakima Sprocket Rocket Manual De Instrucciones página 3

Close jaw, then press silver
hook to close against jaw.
Attach Hex key and
Tighten.
DETERMINE SWITCH POSITION AND INSERT SKEWER.
Switch is underneath SprocketRocket's head.
IF YOUR SPROCKETROCKET IS:
BETWEEN TOWERS
Skewer may be inserted from either side.
Consider access to red knob.
While holding the switch in the
DOWN
POSITION, insert the skewer.
1033352G-3/21
SEPARATE SKEWER FROM QUICK RELEASE LEVER.
Lift cover.
DO NOT INSTALL the
SprocketRocket OUTSIDE the
tower if the switch is in the
DOWN position.
Close red lever.
COVER SHOULD CLOSE WITH
FIRM RESISTANCE.
If not, repeat previous step,
being sure to press the silver
hook closed against jaw.
Loosen red knob until
skewer slips out.
IF YOUR SPROCKETROCKET IS:
OUTSIDE TOWER
OR
Skewer may be inserted from either side.
Consider access to red knob.
While holding the switch in the
insert the skewer.
SPROCKETROCKET OUTSIDE THE
TOWER WITH THE SWITCH IN
The red cover cannot be opened unless
the skewer is unlocked and removed
from the
ALWAYS INSTALL THE
THE UP POSITION.
SprocketRocket's
UP
POSITION,
head.