Yakima Sprocket Rocket Manual De Instrucciones página 4

ATTACH QUICK RELEASE LEVER.
REMOVE FRONT WHEEL AND LOAD BIKE.
Set bicycle forks vertically onto skewer.
CLOSE COVER.
CHECK TO MAKE
SURE BIKE FORK IS
SECURE.
Tug on bike fork.
1033352G-4/21
Gently push and wiggle
lever onto skewer.
Adjust red knob.
COvER ShOUlD
ClOSE WITh FIRM
RESISTANCE.
Engage skewer by rotating
red knob.
Tighten red knob, but leave
enough space for bike fork.
Prevent damage to your forks!
Use extra caution when installing,
or removing bikes with CARBON
FIBER FORKS. Fork tips can crack, or
bend if bike is not loaded vertically.
• If not, tighten red knob and close
cover again.
• If too much resistance, loosen red
knob and try closing cover again.
If forks move out of the skewer:
• Open cover, loosen red knob until forks
slip onto skewer. Tighten red knob,
close cover.
• Cover should close with
resistance
firm
against forks.