Yakima Sprocket Rocket Manual De Instrucciones página 5

LOCK QUICK
RELEASE LEVER.
If you have purchased a lock,
follow lock core instructions to
install the lock.
SECURE REAR WHEEL.
Pull strap through
wheel spokes.
Do not let strap push
against valve stem.
CHECK TIRE FOR TIGHT FIT.
• If not tight, loosen strap.
• Adjust position of strap and strap
base until strap rests against rim.
• TIGHTEN strap again.
TO REPOSITION WHEN
LOCKED AND/OR LOADED:
• Lift red lever, loosen hex key.
• Reposition SprocketRocket.
• Tighten hex key, close red lever.
1033352G-5/21
ATTACH WHEELSTRAP.
• Insert one end of
strap into slot on far
side of Wheeltray.
• Leave other end free.
Insert strap end behind buckle.
TIGHTEN strap by
repeatedly lifting
buckle.
DO NOT OVERTIGHTEN STRAP!
Keep strap centered
on small wheels.
CAUTION
The red lever is spring-loaded and can pinch your fingers when
opening. Use both hands as pictured to avoid a potential pinch.
TO RELEASE STRAP:
Lift tab, lift up on strap.