Memory Card And Pictbridge Troubleshooting - Lexmark 310 Serie Guía De Usuario

Memory card and PictBridge troubleshooting

Symptom
Memory card is not
recognized by the printer
Cannot print from the
digital camera
Diagnosis
Is the memory card
damaged?
Is the memory card
inserted correctly?
Is there more than one
memory card inserted at
the same time.
Are you using a
supported memory card
type?
Do you have a
PictBridge-enabled
digital camera connected
to the printer.
Is the digital camera
PictBridge compatible?
Is the PictBridge-enabled
digital camera set to the
correct USB mode?
Is there a memory card
inserted in the printer?
Are you using the USB
cable that came with your
digital camera?
44
Solution
Verify that there is no
damage to the memory
card.
Insert the memory card
correctly. See page 12.
Only one memory card
may be used at one time.
Remove the second
memory card.
For supported memory
cards, see page 11.
Disconnect the
PictBridge-enabled
digital camera from the
printer.
Remove the device and
use a PictBridge-enabled
digital camera in the
PictBridge port.
Refer to your camera
documentation to
determine if it is
PictBridge compatible.
Refer to your camera
documentation for help
selecting the correct USB
mode.
Remove the memory
card from the printer.
You must use the USB
cable that came with your
camera.
Refer to your camera
documentation to
determine which type of
USB cable it supports.