Installation On Wall; In The Event Of Problems - Rowenta SPRINTO SO4010F0 Modo De Empleo

NOT 029671 Sprinto 28/04/03 11:18 Page 8

6- INSTALLATION ON WALL

GB
The unit is made for wall use.
It must be positioned correctly and in a vertical orientation (switch located in the upper zone; see 4)
You must use the provided wall brackets (I) to attach the unit to the wall.
The minimum distances described in fig.4 must be respected.
Wall Attachment: see fig. 5a.
• Attach the wall bracket with appropriate screws and plugs following the direction of the arrow.
• Insert the upper wall-bracket hook (J) in the unit's transport handle (G), and clip the lower wall-bracket hook (K) onto the unit.
Taking Down the Unit: see fig.5b.
• Maintain a solid grip on the unit and push down upon the lower tongue of the wall bracket.
• Pull the unit out from the bottom.
• Lift the unit up and remove it from the upper hook.
7- CLEANING
• Your appliance must be unplugged before proceeding with any cleaning work.
• You can clean it with a slightly damp cloth.
• IMPORTANT: Never use abrasive products which might damage the appearance of your appliance.
• We recommend that you clean the air inlet and outlet grills at least once a year; (clean with a vacuum cleaner if necessary).
8- STORAGE
• It is extremely important that the unit be allowed to cool down before it is put away.
• When storing your appliance, you can wind the lead around the stand and clip the end into the lead clip (H).
• When you are not using your appliance, store it in a dry place.

9- IN THE EVENT OF PROBLEMS

• Never dismantle your appliance yourself. A poorly repaired appliance may be dangerous for the user.
• Before contacting one of our Approved Service Centres (see enclosed list), ensure that:
– the appliance is set to normal operating mode;
– the air inlet and outlet grills are totally clear.