Nidec Leroy-Somer LSPX Manual De Instrucciones página 7

EU DECLARATION OF CONFORMITY AND INCORPORATION
Beaucourt
plant
We, Constructions Electriques de Beaucourt (CEB), 14, rue de Dampierre, 90500 BEAUCOURT, France, (a company of the Nidec / Leroy-Somer
Holding SA group, boulevard Marcellin Leroy, CS 10015, 16915 ANGOULEME cedex 9, France) declare, under our sole responsibility that the
following products:
Induction Motors type FLSPX for use in the presence of explosive dust; "tb" protective enclosure
bearing one of the following markings on their nameplate:
CE 0080 II 2 D
comply with the following European Directives:
▪ Low voltage:
▪ RoHS 2:
▪ Electromagnetic Compatibility:
▪ ErP:
▪ Atex
▪ European standards:
▪ International standards:
and with the types awarded:
▪
- EU-type examination certificate:
- certificate of conformity:
issued by the Notified Body:
the design and manufacturing requirements are covered
▪
by the PRODUCT QUALITY ASSURANCE notification
This compliance permits the use of these ranges of products in a machine subject to the application of the machinery directive 2006/42/EC,
provided that they are integrated or incorporated and/or assembled in accordance with, amongst others, the rules of standard EN 60204 (all
sections) "Electrical Equipment of Machines".
This equipment must be installed by a professional, liable for ensuring compliance with all installation rules, decrees, orders, laws, directives,
application memos, standards (IEC-EN 60079-14, etc.), regulations, good trade practices and any other document on the installation site. The
professional is also liable for ensuring compliance with the values indicated on the motor information plate(s), instruction manuals, installation and
maintenance manuals and any other document provided by the manufacturer.
Constructions Electriques de Beaucourt (CEB) cannot be held liable for non-compliance with all or part of the above.
Consulter le système de gestion documentaire afin de vérifier la dernière version de ce document.
For the latest version of this document, please access the document management system.
Process: POC2 New product development control
Ex tb IIIC T125°C Db IP65 (T up to 200°C)
2014/35/EU
2011/65/EU
2014/30/EU
2009/125/EC and its (EC) implementation regulation:
640/2009 and amendments (for the products concerned)
2014/34/EU
EN 50581:2012
EN 60034-1:2010; 60034-7:1993/A1:2001; 60034-9:2005/A1:2007;
60034-14:2004/A1:2007; 60072-1:1991; 62262:2004
EN 60079-0:2012/A11:2013; 60079-31:2014; 60529: 2014; 62262:2004
IEC 50581:2013
IEC 60034-1:2017; 60034-7:1993/A1:2001; 60034-9:2005/A1: 2007;
60034-14:2018; 60072-1:1991; 62262:2002
IEC 60079-0:2012/A1: 2013; 60079-31: 2013; 60529:2015
INERIS 20ATEX0011 X
IECEx INE 20.0015X
INERIS (0080) – BP2 – Parc technologique ALATA
60550 VERNEUIL-EN-HALATTE
Under the responsibility of the Notified Body INERIS (0080)
Q 0 1 T
No.
Rev.: A of: 09/04/2020
Cancels and replaces:
/
Doc type: Q06T002 Rev F of 19/02/2018
(for zone 21)
Date and signature of the Technical Department
April 23rd 2020
5 0 1
Page: 1 / 1
T. PERA
7