Tabla de contenido
Publicidad
Section 1 Introduction
®
Brooks
Digital MFC's & MFM's
PC-based Support Tools
Brooks Instrument offers a variety of PC-based process control and service tools to meet the needs of our
customers. SmartDDE may be used with any unit supporting RS-485 in a multidrop configuration, thus allowing
users to control and monitor their Brooks devices. The Brooks Service Tool
diagnose, tune and calibrate Brooks devices equipped with DeviceNet or F
The Brooks Service Tool
1-10
Certifications:
EMC Directive 89/336/EEC:
per EN 61326
Hazardous Location Classification
Enclosure: Type 1/IP40
Ambient Temperature: 0°F > Tamb < 150°F (0°C > Tamb < 65°C)
United States and Canada
UL Recognized: E73889 Volume 3, Section 4
Class 1, Zone 2, AEx nA II T4
Per ANSI/ISA 12.12.02 - 2003 and ANSI/UL 60079-15
Ex nA II T4
Per CSA - E79 - 15
Europe - ATEX Directive 94/9/EC
KEMA 04ATEX1118X
Per EN 60079-15: 2003
The product shall be installed in a suitable enclosure providing a degree of
protection of at least IP54 according to EN60529, taking into account the
environmental conditions under which the equipment will be used.
Pressure Equipment Directive (97/23/EC):
See Table 1-1 for further pressure information
TM
interfaces with Brooks products via a special service port.
Installation and Operation Manual
X-TMF-SLA5800-MFC-eng
Part Number: 541B027AAG
TM
(BST) may be used to monitor,
Fieldbus communications.
OUNDATION
April, 2013
Publicidad
Tabla de contenido
