Specifications - Sony SDM-S204 Manual De Instrucciones

Specifications

LCD panel
Panel type: a-Si TFT Active Matrix
Picture size: 20.1 inch (51 cm)
Input signal format
RGB operating frequency*
Horizontal: 28–92 kHz (analog RGB)
28–75 kHz (digital RGB)
Vertical:48–85 Hz (analog RGB)
60 Hz (digital RGB)
Resolution
Horizontal: Max.1600 dots
Vertical: Max.1200 lines
Input signal levels
Analog RGB video signal:
0.7 Vp-p, 75 Ω, positive
SYNC signal:
TTL level, 2.2 kΩ, positive or negative (Separate
horizontal and vertical, or composite sync)
0.3 Vp-p, 75 Ω, negative (Sync on green)
Digital RGB (DVI) signal: TMDS (Single link)
Power requirements
100–240 V, 50–60 Hz, Max. 1.2 A
Power consumption
Max. 58W
Operating temperature
5–35 C
°
Dimensions (width/height/depth)
Display (upright):
Approx. 440.5 × 447.5 × 234 mm (with stand)
× 17 × 9
3 5 1
(17 / / /
8 8 4
Approx. 440.5 × 354.5 × 72.5 mm (without stand)
× 14 × 2
3 7
(17 / / inches)
8 8
Mass
Approx. 7.6 kg (16 lb 12 oz) (with stand)
Approx. 6.2 kg (13 lb 11 oz) (without stand)
Plug & Play
DDC2B
Accessories
See page 6.
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
inches)
GB
23