Rps Airflow Patterns - Cisco Systems Power System 2300 Guía De Instalación De Hardware

RPS Airflow Patterns

Figure 1-9 RPS 2300 Rear Panel
.
1
2
Ground lug
1
Fan exhaust
2

RPS Airflow Patterns

Cisco Redundant Power System 2300 Hardware Installation Guide
1-16
3
4
3
DC output connectors
3
The DC output connectors require a cable to connect to the switch. You can use
two types of RPS cables. See the
Appendix B, "Connector and Cable Specifications."
The RPS 2300 air circulation system consists of the fan module and the power
supply modules that are installed in the RPS front panel. The airflow patterns vary
depending on the RPS power supply configuration.
Figure 1-10 shows the airflow patterns for the RPS. The blue arrow shows cool
air flow, and the red arrow shows warm air flow.
airflow patterns and the power supply configurations.
1
5
6
2
"Cabling Options" section on page 2-16
Chapter 1 Product Overview
Table 1-5 describes the RPS
78-17647-02
and