Cisco Systems Power System 2300 Guía De Instalación De Hardware página 69

RPS Cable for the Catalyst 3750-E and 3560-E
Switches
78-17647-02
Connector and Cable Specifications
This appendix describes the cables that you use to connect the RPS 2300 to other
devices. It includes the connector and pinout specifications for these cables:
RPS Cable for the Catalyst 3750-E and 3560-E Switches, page B-1
•
RPS Cable for Other Supported Switches, page B-3
•
The RPS cable for the Catalyst 3750-E and 3560-E switches
(CAB-RPS-2300-E=) is a 48-inch (1.5-meter) cable with a 22-pin connector on
each end. The connectors are keyed for insertion in the correct orientation.
Figure B-1 shows the connector, and
Figure B-1 22-Pin RPS Connector
Top of Connector (Logo Side)
12 13 14 15 16 17 18 19 20 21 22
1 2 3
Cisco Redundant Power System 2300 Hardware Installation Guide
A P P E N D I X
Table B-1
4 5 6 7 8 9
has the pinout information.
10 11
B
B-1