SOMFY pujol marathon Pro Q II Servicio Técnico página 20

marathon Pro
PHOTOCELL WITH TEST CONNECTION
1 2 3
28 27 26 25 24 23 22
EMITTER CONNECTION PHOTOCELL/RECEIVER WITH TEST
"MUTE" PHOTOCELL TEST ACTIVATION (the default
installation comes with the test deactivated)
With the door closed and voltage connected, press the
programming button (PATH PROG.)
have elapsed press again; an acoustic signal indicates that
the test has been activated.
To deactivate the TEST
With the door closed and voltage connected, press the
programming button (PATH PROG.)
have elapsed press again; an acoustic signal indicates that
the test has been deactivated.
EXTERNAL RADIO
The panel has the option of working with the built-in
receiver, or with an external card if the radio devices are
not supported. Both receivers can work internally, but only
the receiver built-into the panel can work externally.
Memorizing the transmitter code.
To memorise transmitter codes, the control panel must be in a stable position, and the door in closed or open
position.
Q
II
4 5 6 7 8 9
and, before 5 seconds
after 5 seconds
and,
SELECT INTERNAL /
a a a a
a a a a a a a a
a a a a a a a a
beam of light
1
a a a a a a a a
2
a a a a a a a a
a a a a a a a a
3
a a a a a a a a
4
on
5
off
Circuit diagram
Terminal photocell
8. 0v
1. (12/24V) 0
2. (12/24V) + 9. 12v DC
3. TEST 22. TEST
4. CONTACTO 7. Común C.G.
5. CONTACTO 6. C. SEG
Circuit diagram
Photocell Photocell
Terminal box
transmitter transmitter
8. 0v
2
9. 12v DC
1
22. TEST
7. Común C.S.
6. C. SEG
Internal External
Selection Radio internal/external
English
Terminal box
Photocell Photocell
receiver receiver
1
2
4
6
19