Steren COM-817 Manual De Instrucciones página 64

And every IP address should be input in appropriate IP field, a IP address
only divided into four IP octets by sign"." is acceptable.
- WAN IP address: The IP address that your Internet access into.
- Subnet mask: Specify a Subnet Mask for your WAN segment.
- Default gateway: It is provided by your ISP.
- Primary DNS: DNS server is used for resolve domain name. Your ISP will
provides you with at least one DNS IP address, input IP address of your DNS
server in this field.
- Secondary DNS: Input IP address of backup DNS server, or you can leave
this field blank.
4.2.4 Wireless Configuration
You can choose "Enable" or "Disable" to enable or disable the
wireless function. The default setting is "enable". If you chose the
"Disable" status, the repeater will become a wired broadband repeater
without wireless function, so be careful when you choose this status.
- SSID: SSID (Service Set Identifier) is your wireless network's name shared
among all points in a wireless network. The SSID must be identical for all
devices in the wireless network. It is case-sensitive and must not exceed 32
characters. Make sure all points in the wireless network have the same SSID.
For added security, you should change the default SSID to a unique name.
- Region: Choose a correct region which fit your use environment.
- Channel: Wireless repeater communicates to wireless cards in a particular
channel, which can reduce interference between different channels.
- Authentication Type: Different authentication types use different encryption
types, which can encrypt wireless data to protect your wireless communication.
19 19