to WAN.
4.8. Security
4.8.1. Security Settings
VPN is commonly used for encapsulate and encrypt data across the public
network. For VPN tunnel, the repeater supports IPSEC pass-through, PPTP
4.8.2 IP Address Filtering
- Status: the default is disable. The rules of "Internet access control" based
on source IP, port number and protocol.
- Description: describe IP Firewall list to tell from different IP Firewall lists.
- Rule: you can select permit or deny. The default is permit.
- Source IP address: input the source IP address that you want to control.
The default format is ***.***.***.***(e.g: 192.168.2.3).
- Protocol and Port: If the rule has already existed in "Protocol Template".
You can select appropriate item and apply it. Or you can input protocol type
and port number manually, click "add" button, then the item will displayed in
the list.
Follow the following steps to set Internet Access Control:
1. You can select "enable" and click "Save" to enable "IP Firewall" function.
This is only the first step; you should continue to create appropriate rules for
"IP Firewall".
2. Input description information for current access control rule in the
"Description" field. Input IP address of host you want to restrict.
34
34