Network - Steren COM-817 Manual De Instrucciones

Method 3:
1. Select 'Input PIN from AP' in WI-FI protect setup page, input PIN of the
repeater, and then click 'PIN Input Config (PIN)'.
2. Select the repeater in the pop-up window, then click 'Select'.
3. The connection between the adapter and the repeater will be established
automatically.
Note: If there is more than one AP in the PBC mode when you use the
method 1, there will be session overlap. Please using method 2/3 or wait
for a while push the button again.
4.3.3 WPS Configuration
Display the WPS configuration information.

4.4 Network

22 22
4.4.1 WAN
This item provides two access
types for you to configure the
WAN parameters.
They are wired access and
wireless access.