Troubleshooting - Steren COM-817 Manual De Instrucciones

4.12.8 Reboot
Click "Reboot" button to restart the repeater.
4.13 About

5.- TROUBLESHOOTING

1) I cannot access the Web-based Configuration Utility from the Ethernet
computer used to configure the repeater.
- Check that the LAN LED is on. If the LED is not on, verify that the cable for the
LAN connection is firmly connected.
- Check whether the computer resides on the same subnet with the repeater's
LAN IP address.
- If the computer acts as a DHCP client, check whether the computer has been
assigned an IP address from the DHCP server. If not, you will need to renew the
IP address.
- Use the ping command to ping the repeater's LAN IP address to verify the
connection.
40 40