Pre-Installation; Planning Installation; Tools Required; Package Contents - ETI Solid State Lighting FM-15-16-802-SV-D-BT Manual De Uso Y Cuidado

Pre-Installation

PLANNING INSTALLATION

Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package contents
list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement
parts.
NOTE: Keep your receipt and these instructions for proof of purchase.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.

TOOLS REQUIRED

Wire
Strippers
Flathead
Screwdriver

PACKAGE CONTENTS

Part Description
A Fixture Plate
B Diffuser Shade

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.
Part Description
AA Wire Connector
BB Mounting Screw
This fixture does not use a mounting bracket to secure it to the electrical box. Instead, it is secured to the box by the included screws
specifically designed to ground the pan to a metal electrical box. For safe operation, use only the electrical box screws included in the
hardware kit. Screw them into the electrical box until there is about 3/8 in. between the ceiling and the underside of the screw head.
Safety
Goggles
Phillips
Screwdriver
A
Quantity
1
1
B
Quantity
3
2
Ladder
Electrical
Tape
AA
3
Please contact 1-855-384-7754 for further assistance.
BB
Gloves
Wire
Cutters
ETiSSL.com