Activate/Deactivate Player's-Leds And Buzzer-Signal - ECU Silver Instrucciones De Servicio

change to the left clock and press again the MODE – button to change to the right clock. Press a third time to
change to both clocks again. After the last digit you will get to the next level of display (thinking time, number of
moves, extra time). Maximum adjustable time is 9 h. 59 min. or 9 min. 59 sec., maximum adjustable number of
moves is 99.
When you have finished editing the thinking time the edited mode is saved as USER nn ( nn = number of the main
mode e.g. MODE 01 => USER 01) by pressing the PROG – button. Previously saved modes or default settings are
deleted.
Note: Taking the batteries out will delete all modulations and will re-set all default settings.
You can save or leave the editing by pressing the PROG –button at any time. All data that has been edited so far
will be saved as mode USER. This will also happen if you press the O / I / Stop – button, the clock is turned off as
well. After turning the clock on again the mode that has been activated last will be started, here USER nn.
Every mode USER nn can be edited by pressing the PROG – button.
8.

Activate/deactivate player's-LEDs and Buzzer-signal

Default settings: LED tuned on (LED +) and Buzzer-signal turned off(BUZ -).
Press the MODE –button to select the setting until LED + BUZ – is displayed.
The left player button will deactivate (LED -) or activate (LED +) the LED.
The right player button will activate (BUZ +) or deactivate (BUZ -) the buzzer-signal.
Note: These modulations will be saved after turning the clock off. But both activations will be turned of when the
Low-Battery symbol is displayed.
17