2 - LCD display instructions
2.1: "DISTANCE" window: Displays the distance value in numbers.
2.2: "CALORIES" window: Displays calories in numbers.
2.3: "TIME" window: Displays the time in numbers.
2.4: "SPEED" window: Displays the speed in numbers.
2.5: "PULSE" window: Displays the pulse in numbers.
2.6: "INCLINE" window: "Displays the slope value.
The numerical variation of each window
TIME :0: 00 - 99.59 (Min)
SPEED: 1.0 - 16.0 (KM / H)
TILT: 0 - 12%
DISTANCE: 0.00 - 99.9 (KM)
CALORIES: 0.0 - 999 ©
3 - Instructions for the buttons:
3.1 "PROGRAM": ": Program selection key: with the belt stopped, select the program cycle
3.2 manual for "P1-P36 → U1-U3 HRC1-HRC3 FAT" according to your preference.
"MODE": mode selection key: with the treadmill stopped, set the Mode according to
your preference.
In program P0, you can select Time countdown → distance countdown mode calories
countdown Normal mode. The return to the default occurs every 30 minutes in programs P1-
P36. It is not possible to select the FAT program when in FAT mode.
3.3 "START / PAUSE" key: With the belt stopped, press the START key to turn on the belt. When
pressing the "START" key while the belt is moving, it will stop / pause.
3.4 "STOP" key: with the conveyor moving, stop the conveyor slowly by pressing the key "STOP"
once. When the LCD displays the message ERR, press the "STOP" key to delete the message.
With the belt moving, press the "STOP" key twice, and the wake to immediately.
3.5 "SPEED +" key: increases the speed with the moving belt. Increase the parameter in the
body fat test.
3.6 "SPEED-AGE -" button: reduces the speed with the moving belt. Reduces the parameter in
the body fat test.
3.7 "SPEED SHORTCUT" key: with the belt moving, speed increases pressing the "SPEED
SHORTCUT" key 4, 8, 12, 16.
3.8: Key "▼": Reduce the inclination by pressing this key.
3.9: "▲" key: Increase the incline by pressing this key.
3.10: "INCLINATION HOTKEY" key: Increase the inclination directly INCLINATION HOTKEY by
pressing the fast tilt 3, 6, 9, 12.
4 - Key security function:
In any case, if the security key is pulled out, the display shows: E7 and the alarm sounds. To
reinsert the security key, the panel will light up for 2 seconds and go into boot mode manual
(equivalent to complete reset).
5 - Instructions for connecting:
5.1Connect the power cord to a 20A outlet. Place the switch in the "ON" position. The screen will
light up and sound.
5.2 Place the safety key in the correct position and turn on the belt. The LCD display light comes
on and beeps. The belt enters Normal Mode P0.
5.3 Press the "PROGRAM" key to select the program P0 P36, U1-U3; HRC1-HRC3; FAT
a) "P0" user program. Press the "MODE" key to select the training mode. The user can select the
speed and incline. The standard speed is 1.0 km / h. THE
standard slope is 0%.