Alliance Laundry Systems HCI8VC2 Guía De Programación página 10

Programming
3. Press the Start (#) key to accept the option and to
then scroll forward.
NOTE: To select a vend amount, use the Up and
Down (arrow) keys to increase or decrease the
amount then press Start (#) key.
4. Press the Stop (*) key anytime to exit Setup
Mode. The display will show sump temperature.
Programming a Cycle
1. With the display showing sump temperature,
press the Up (arrow) key to edit a cycle. The
display will show "CY01".
2. Press Up or Down (arrow) key until cycle to be
edited is displayed. Press Start (#) key to begin
editing selected cycle.
3. For VC2 models set up for "16Pr", display
flashes "Strt" then "A
selected cycle. Press Up or Down (arrow) keys to
increase or decrease vend price for that cycle.
Press Start (#) key to accept.
4. Use Up or Down (arrow) key to select agitation.
Refer to Table 2 for agitation options. Press Start
(#) key. Display will show "PrE".
Agitation Actions
Display Type
n
nor Normal
(Cycles 1 – 6,
9 – 16)
gEnt Gentle
(Cycles 7 and 8)
Table 2
8
n
t" then vend price for
Description
12 seconds forward,
3 seconds pause,
12 seconds reverse,
3 seconds pause
3 seconds forward,
12 seconds pause,
3 seconds reverse,
12 seconds pause
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming Cycle Segments
NOTE: Each cycle program can be customized
within the eight program segments contained in a
cycle. A time must be entered for each segment. To
skip a segment or spin, set the time to "00" and
press Start (#) key. Refer to Table 3 for time
parameters.
Time Parameters
Segment
PreWash "PrE"
Wash "UASH"
Fill 1 – Fill 6
"FIL1"... "FIL6"
Intermediate Spin
(Fills 1 – 5)
Final Spin
(Fill 6)
Table 3
NOTE: Spin times in cycle segments 1 – 7 are
entered in seconds (30 to 240) and time for final
spin in segment 8 is entered in minutes (1 to 10).
5. Press Up (arrow) key until display shows
segment to be edited. Press Start (#) key.
6. Use Up or Down (arrow) key to select segment
time. Set this value to zero to skip segment. Press
Start (#) key.
7. Use Up or Down (arrow) key to select fill
temperature: cold ("CFIL"), hot ("HFIL"),
warm ("bFIL") or auxiliary ("AFIL"). Press
Start (#) key.
NOTE: An auxiliary fill is available only if
machine is equipped with extra fill valve.
Minimum Maximum
2 minutes 30 minutes
2 minutes 20 minutes
2 minutes 15 minutes
30 seconds 240 seconds
1 minute 10 minutes
F232131