Connection To The Drain Line; Chap 3 Risks And Important Warnings - Elettrobar FAST 140 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 49
INSTRUCTION MANUAL FOR DISHWASHERS
GB
Free drain
Max.
1 m
With discharge pump (available on
request)
This appliance is to be used only for the use for which it was expressly designed. All other uses
are to be considered unfit and therefore dangerous.
The specialised personnel who will install the machine is obliged to appropriately instruct
the user on the appliance's operation and any safety measures that are to be complied
with, also by providing practical demonstrations.
Any type of service done on the machine, also in the case of failure, must be performed only by
the manufacturer or by an authorised service centre and by qualified personnel, using only
original spare parts.
Always disconnect or separate the machine from the electric and water networks before
performing maintenance, repairs or cleaning.
Untrained personnel must NOT use the machine.
The machine must NOT remain live when it is not used.
NEVER open the machine door quickly if it has not finished the cycle.
NEVER use the machine without the factory-installed safety attachments.
NEVER use the machine for washing object of a type, shape, size or material not guaranteed for
machine washing or not perfectly intact.
NEVER use the appliance or its parts as a ladder or support for people, things or animals.
NEVER overload the open door of front-loading machines, which are sized to support only the
rack loaded with kitchenware.
NEVER immerse bare hands in the washing solutions.
NEVER turn the machine over after installation.
Page 4 of 12

2.5 Connection to the drain line

The drain line must be made up of a free water
trap of a size proportionate to the delivery of the
drain pipe supplied with the machine. The pipe must
be able to reach the water trap without being
pulled, squeezed, bent, crushed, pressed or
forced by anything.
The tank empties by gravity, so the drain must be at
a lower level than the base machine.
If the drain is not at a lower level than the base of the
machine, you can use the version equipped with a
discharge pump (available on request).
In this case the maximum drain height is 1 m.
Always check that the drain works properly and that it
is not clogged.
All other solutions must be previously agreed upon
and approved by the manufacturer.

Chap 3 RISKS AND IMPORTANT WARNINGS

Publicidad

Tabla de contenido
loading

Productos relacionados para Elettrobar FAST 140

Tabla de contenido