Publicidad
Assembly Instructions
Fig. 28
[PF 3883] 1'' x 4'' x 40-1/4''
Climbing Wall Boards must
have a nominal gap of 1''
Fig. 28a
(2) 1-1/2'' Hex Head Bolts
Rock Wall
ssembly.
1. Assemble Rock Wall as shown in (Fig. 28).
2. Attach Rocks to Rock Wall as shown in (Fig. 28a).
3. Attach Rock Wall to Tower as shown in (Fig. 28b) and (Fig. 28c).
Note: Two rock locations will be left open once all rocks are placed. This is to allow multiple configurations for your
Rock Wall activity.
[PF 3883] 1'' x 4'' x 40-1/4''
[PF 3885] 1'' x 4'' x 40-1/4''
[PF 3883] 1'' x 4'' x 40-1/4''
[PF 3885] 1'' x 4'' x 40-1/4''
[PF 3883] 1'' x 4'' x 40-1/4''
[PF 3883] 1'' x 4'' x 40-1/4''
[PF 3885] 1'' x 4'' x 40-1/4''
[PF 3883] 1'' x 4'' x 40-1/4''
Note:
(2)"T" nuts
3/8" Holes
Hold (rock)
(1) Loc Washer per bolt
(1) Flat Washer per bolt
Fig. 28b
[PF 3884] 1'' x 4'' x 40-1/4''
[PF 3884] 1'' x 4'' x 40-1/4''
(2)
2-1/2'' deck
screws
per joint
(3)
2-1/2'' screws
per joint
2-1/2'' screw
38
Fig. 28c
Under Deck View
Publicidad
