Assembly Instructions
Fig. 36
(3)
1-1/4''
screws
(2) [PF 3911] 5/4'' x 5/4'' x 12''
per board
from inside
Fig. 36a
[PF 3867] 1'' x 5'' x 21-1/2''
[PF 3865] 1'' x 5'' x 18-1/2''
1-1/4''
screws
per board
1-1/4'' screw
[PF 3868] 1'' x 5'' x 21-1/2''
(4)
[PF 3866] 1'' x 5'' x 18-1/2''
(2)
Safety
Brackets
INsIDE VIEW
Large Roof
1. Attach (2) Slat Supports as shown in (Fig. 36).
Note: Drive screws through bottom of underlying
slats and into underside of Slat Supports.
2. Attach (4) Roof Slats as shown in (Fig. 36a).
3. Install (2) Safety Brackets as shown in (Fig. 36b).
Note:
Fit notch in Safety Brackets tightly against
bottom of Roof A-Frame
46
Fig. 36b
Note:
Fit Notch in Safety
Brackets Tightly
Against Bottom of
Roof A-Frame
(6)
1-1/4''
screws
per bracket
ssemby Cont.