Acuity Brands AEDAN Instrucciones De Instalación página 7

IF HOUSE WIRING DOES NOT INCLUDE A GREEN GROUND
WIRE, CONSULT YOUR LOCAL ELECTRICAL CODE FOR
APPROVED GROUNDING METHODS.
NOTE: These OLED luminaires may be dimmed with a 0-10V
dimmer. If dimming is NOT desired, simply cap off the
PURPLE and GREY leads on the driver with (2) of the small
WIRE NUTs provided (see Step-3), and operate fixture in
the ON/OFF mode. If dimming is desired, select a wall dimmer
from the list of recommended models (on page 14). Install wall
dimmer according to manufacturer's instructions. Run dimmer
outputs (PURPLE and GREY) to the junction box. Follow local
and NEC electrical codes.
(Figure 2b): AC power hot (BLACK) and neutral (WHITE), ground
(GREEN), and dimmer leads (PURPLE and GREY)
INSTALLATION INSTRUCTIONS
7