Figure B
Outdoor sensor
e Display
r Indicator LED
t Fixing lugs
z TX button
u °C/°F button
i Channel switch
o Battery compartment
p Battery compartment cover
First use
Requirements at the setup location
►
►
►
■
_291952_AHFL433A1_WeatherStation_LB9.indb 10
When selecting the setup location, make sure the devices are
not exposed to direct sunlight, vibration, dust, heat, cold or
humidity .
Do not set up the device near sources of heat, e .g . heaters .
Mount the outdoor sensor within a maximum radius of 164 ft
to the weather station . Make sure there are no interfering ob-
stacles between the outdoor sensor and the weather station .
Otherwise, there could be transmission interference .
│
10
US - EN
AHFL 433 A1
08.05.18 13:2