Auriol AHFL 433 A1 Manual De Instrucciones página 12

The weather station will now attempt to connect to the outdoor
sensor . On the display field for outdoors 3, the reception icon
If no outside temperature or humidity is shown within approx.
3 minutes, the weather station stops searching for a signal. The
reception icon
shows
due to structural conditions or because the sensor is too far
away.
If the device is unable to connect to the outdoor sensor automati-
cally, you can establish a connection manually:
♦
♦
■
_291952_AHFL433A1_WeatherStation_LB9.indb 12
above the channel display
turns off and the display field for outdoors 3
and . The system likely cannot detect a signal
Press and hold the control surface
icon on the display field for outdoors 3 blinks .
Press the TX button z to manually start the wireless signal
for the outdoor sensor .
│
12
US - EN
blinks .
4 until the reception
AHFL 433 A1
08.05.18 13:2