If you choose the setting
for 24-hour measurement storage,
the saved MIN and MAX values for temperature and humidity
are deleted each day at midnight. If you choose the setting
,
the data is saved permanently until you replace the batteries.
Displays in basic mode
After you have set the time and the weather station has received
the signal from the outdoor sensor, the device enters basic mode .
In basic mode, the weather station shows the following informa-
tion on the display:
The time display 2
By default, the time is shown in
12-hour format . In the time from
12:00 noon to 11:59 p .m .,
(Latin for "post meridiem"
= afternoon) will appear before the time . In the time from 12:00
midnight to 11:59 a .m .,
(Latin for "ante meridiem" = morning)
will appear before the time .
│
■
14
US - EN
AHFL 433 A1
_291952_AHFL433A1_WeatherStation_LB9.indb 14
08.05.18 13:2