Displaying The Maximum/Minimum Temperature/Humidity; Switching Between Temperature Units - Auriol AHFL 433 A1 Manual De Instrucciones

Displaying the maximum/minimum tempera-
ture/humidity
After connection to the power supply and the outdoor sensor
has been established, the maximum and minimum values for
temperature and humidity are automatically captured and stored
by the weather station .
♦
♦
♦
♦

Switching between temperature units

Upon delivery, the temperature unit is set to degrees Fahrenheit
( ) by default .
♦
♦
AHFL 433 A1
_291952_AHFL433A1_WeatherStation_LB9.indb 17
In basic mode, press the control surface
both display fields (3 and 7), the
to the humidity and the highest measured value for both
inside and outside is shown .
If you press the control surface
icon appears and the lowest measured value for both
inside and outside is shown .
After about 5 seconds, the current values for inside and
outside are automatically shown once more .
Press and hold the control surface
to delete the stored values .
In basic mode, press the control surface
between temperature units (
for both the inside and outside temperature .
Press the °C/°F button u to change the temperature unit
on the outdoor sensor display e .
6 once . In
icon appears next
6 in basic mode, the
6 for about 3 seconds
5 to switch
or ) . The display switches
US - EN
│ 17 ■
08.05.18 13:2