Technical Data; Vibrationinformation - KRESS KUH10 Manual De Instrucciones

COMPONENT LIST
1. AUXILIARY HANDLE
2. SPINDLE LOCK BUTTON
3. ON/OFF SWITCH
4. VARIABLE SPEED CONTROL
5. BATTERY PACK RELEASE BUTTON*
6. BATTERY PACK*
7. WHEEL GUARD FOR GRINDING
8. DISC *
9. SPANNER
10. INNER FLANGE
11. OUTER FLANGE
12. CLAMP ADJUSTMENT NUT
13. SPINDLE
14. GUARD CLAMPING LEVER
10
* Not all the accessories illustrated or
EN
described are included in standard delivery.

TECHNICAL DATA

Type KUH10 KUH10.91 (H10 - designation of
machinery, representative of angle grinder)
Rated voltage
No load speed
Disc size
Disc bore
Spindle thread
Machine weight
ACCESSORIES
Spanner
Auxiliary handle
Wear protective gloves.
KUH10 KUH10.91
20V
3500/6000/8500/min
125mm
22.2mm
M14
2.4kg
KUH10 KUH10.91
1
1
SDS wheel
guard
Battery pack
(KAB21)
Charger
(KAC21)
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the tool. Refer to the accessory packaging for
further details. Store personnel can assist you and offer
advice.
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.

VIBRATIONINFORMATION

Vibration total values (triax vector sum) determined
according to EN 60745:
Surface grinding
or abrasive
cutting off
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring
it is sharp and in good condition.
1.7Kg
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed
WARNING: To be accurate, an estimation of
1
exposure level in the actual conditions of use
1
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
1 1
2 /
1 /
L = 85 dB(A)
pA
L = 96 dB(A)
wA
Vibration emission value
a = 4.94 m/s
2
h,AG
Uncertainty K = 1.5 m/s²
3 dB(A)