Care And Cleaning; Troubleshooting; Light Distribution - ETI Solid State Lighting 54197112 Guía De Uso Y Cuidado

Linking Feature (continued)
1
Connecting another light fixture with a linking cable
□ Use the 12 in. linking cable (C) to connect additional light
fixtures (not included), if desired.
□ Follow the instructions on the previous page to install the
additional under cabinet light fixtures (not included).
nOTe: When using the linking cable (C), the maximum
distance between two light fixtures is 12 in. using the
linking cable (D) provided.
□ Affix the linking cable (C) to the underside of the cabinet
with wire clips (not included), if desired.
2
Connecting another light fixture with
the end-to-end linking connector
□ Use the end-to-end linking connector (D) to connect
additional fixtures (not included), if desired.
□ Follow the instructions on the previous page to install the
additional under cabinet light fixtures (not included).
A
C
D
A
D
6

Care and Cleaning

CaUTiOn: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the
fuse box.
□ Clean the fixture with a soft, dry cloth.
□ Do not use cleaners with chemicals, solvents, or harsh abrasives.
□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.

Troubleshooting

WarninG: Before doing any work on the fixture, disconnect power to the light fixture.
Minor problems often can be fixed without the help of an electrician.
Problem
The fixture will not light. The power is off.
The circuit breaker is off.
There is a bad connection.
There is a defective switch.
The fuse blows or the circuit breaker The wires are crossed or the power
trips when the light is turned on.
wire is grounding out.

Light distribution

±180°
-150° 150°
-120°
-90°
50.32
100.64
-60°
150.96
201.28
-30° 30°
251.60
0°
Possible Cause Solution
Ensure the power supply is on.
Ensure the circuit breaker is in the on position.
Check to ensure proper wire connections are made.
Contact a qualified electrician.
Contact a qualified electrician.
Check the wire connections.
Contact a qualified electrician or call customer
service 1-855-384-7754.
120°
90°
60°
7
Please contact 1-855-384-7754 for further assistance.
www.ETiSSL.com