Moving The Balance; Transporting The Balance - Sartorius Secura Instrucciones De Instalación Y Manejo

Moving the Balance

Moving the Balance over Short Distances in the Lab
3
t
Hold the balance under the housing,
lift it up carefully, and carry it to its
new location.
h
The balance needs to be re-leveled and adjusted each
time its setup location is changed.

Transporting the Balance

3
Please use the original packaging for shipping.
Packaging can be ordered through the Sartorius
Service Center if required.
3
Prior to shipping, switch the balance to standby mode
(see previous page) and then pull the plug.
t
Secura Models: Remove the following parts from
the balance:
– Draft ring (1) for models with 0.1 mg
1
readability
2
– Weighing pan (2)
3
– Pan support (3)
4
– Centering ring (4) for models with
5
0.1 mg readability
6
– Shield disk (5)
– Remove glass panels from the draft
shield (6): see next chapter, "Care and
Maintenance."
t
Quintix and Remove the following parts from
Practum Models: the balance:
– Weighing pan (1)
1
– Pan support (2)
2
– Shield disk (3)
– Remove glass panels from the draft
3
shield (4): see next chapter, "Care and
4
Maintenance."
Avoid glass breakage,
shocks, and vibrations:
Never lift or carry the
balance by its draft shield.
t
Turn the draft shield lock to
"unlocked."
t
Next, remove the wind shield from
the balance.
t
Insert the respective weighing pan
B
A
and pan support into the opening
shown in the image to the left:
– A = Weighing pan and pan support
with a diameter of 120 mm
– B = Weighing pan and pan support
with a diameter of 90 mm
t
Put packing pads over the glass
panels
t
Insert the AC adaptor from the
cardboard box into the packing pad.
t
Put the top part of the packaging
over the device parts.
t
Next, put the packaged balance into
the cardboard box and seal the box.
Installation and Operating Instructions Secura, Quintix, Practum
English
t
Insert the bottom part
of the packaging into the
box.
t
Place the following parts
into the bottom part of
the packaging:
– Draft shield
– Balance
– Base plate
– Side panels
– Top glass cover
7