Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
AUTOMATIC TUNING
1
Select the reception band (FM or AM) confirming it on
the display.
FM/AM
2
TUNING
MODE
AUTO/MAN'L MONO
3
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
* If the station where tuning search stops is not the desired
one, press again.
* If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to
the MANUAL TUNING method.
26
TUNING OPERATIONS
RX-V692
or
FM
AM
RX-V592
or
RX-V692
RX-V592
AUTO TUNING
AUTO
DOWN TUNING UP
l6
20
l2
28
8
40
4
60
2
0
–dB
1
3
2
MANUAL TUNING
1
Select the reception band (FM or AM) confirming it on
the display.
FM/AM
2
TUNING
MODE
AUTO/MAN'L MONO
3
Tune to a desired station manually.
DOWN TUNING UP
* To continue tuning search, press and hold the button.
Note
If you tune to an FM station manually, it is received in monaural
mode automatically to increase the signal quality.
RX-V692
or
FM
AM
RX-V592
or
Turn "AUTO
(TUNING)" off.